Eltek Water Block Safety System

Eltek Water Block Safety System

• Burst Pressure: 725 PSI.
• Max. Static Pressure: 145 PSI.
• Min. Flow Rate: .5 GPM.
• Max. Water Temperature: 158°F.
• Inlet/Outlet To: Max Adapter Tee 3/8" Compression.
• Outlet Bottom: 1/4" Quick Connect Speedfit.
• Rated Life Span: Aprox. 80,000 GAL.
• Valve can be reset by manual reset button.
• Water Block to be installed in vertical position only.

The Water Block valve is an overflow safety device, which controls the maximum continuous flow of water between 1.3 and 13.2 gallons. Its function is to measure the number of gallons of water that have passed through it. If this quantity exceeds the set value, the Water Block stops the flow and keeps this safety condition until user intervention. If the water volume does not exceed the set value, the Water Block mechanically and automatically resets the measured volume and the Water block ™ is ready to restart a new measurement cycle. The Water Block ™ does not require power, simply water flowing through it.